BURN2
BURN2
- 100% ash-free burnout for dental fast burnout chrome cobalt casting
- No investment cracks or expansion
-
Lithium disilicate inlay, onlay, overlay, laminate and veneer models
- Produced under ISO standarts 13485:2016
- Find here validated DLP, LCD 3D printers list
Product Description
Product Features
- 100% ash-free burnout for dental fast burnout chrome cobalt casting
- No investment cracks or expansion
- Lithium disilicate inlay, onlay, overlay, laminate and veneer models
- Produced under ISO standarts 13485:2016
- Find here validated DLP, LCD 3D printers list
Post Process
1- Washing
After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.
4- No need post UV curing! Enjoy your casting.
Storage Conditions
Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C).
Do not forget shaking the resin well before use.
If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.
-
100% ASH-FREE CASTABLE
Specially made for direct casting. Evaporates with heat leaving no ash.
-
NO NEED POST CURING
After printing wash and dry yet it is ready to proceed rapid dental casting.
-
E-MAX PRESS APPLICATIONS
Empress Lithium disilicate inlay, onlay, overlay, laminate and veneer models.
-
PERFECT FITTING
High accuracy and perfect fitting margin lines for your castable applications